CHEMICAL DOSING ACCESSORIES

International Chemicals Engineering (I.C.E) supply a wide range of accessories to industries such as oil & gas, water treatment and chemical. This ranges from level gauges and level control, through to pH/ORP controllers and injection equipment. Below is a briefing of what I.C.E. can offer, however we source and supply many accessories outside this range. For any enquiries regarding specfication and pricing, please contact us here.

LINC Level Control

123

Kenco Level Measurement

newnewnew215712-g

Hoffman Controllers

newnew215712-g

Etatron Peristaltic

new215712-g

Motors
&Tanks

215712-g

Oil, Refining and Petrochemical

I.C.E. have strong experience with the metering of chemicals used in all phases of the production, processing, refining, transmission and distribution of oil and gas products.

Natural gas, LPG, LNG & Biogas

I.C.E. are Australian leaders in providing trusted equipment for the metering of corrosion inhibitors for instrument protection, methanol to prevent freezing, and odorant injection for public safety.

Offshore Industry

I.C.E. have the technical knowledge and product range for the metering of Oil and Gas corrosion inhibitors, emulsion breakers, oxygen scavengers, methanol injection and many others.

LINC Level Control

LINC manufactures level and flow switches for hazardous applications requiring corrosion resistance and explosion-proof ratings. Environmentally isolated design keeps operational fluids separate from control circuit.

Linc Level Switch Brochure

  • Available with 316 stainless steel and polypropylene displacer option for various process pressures.
  • NPT and externally caged process connections available.
  • Standard cartridge switch is SPST with optional SPDT available.
  • Flow switches also available.
Linc Level Switch Brochure

LINC-282 Pneumatic Level Switch

These units are used as a level control or as a high or low level alarm.  The pneumatic output can be used to operate valves, sound alarms or perform and other desired pneumatic function.

  • Easy to repair: Repairs on-site in 20 minutes with the “quick-change” pneumatic cartridge
  • Easy to field test: The manual override option enables mechanical and pneumatic unction testing while installed
  • Output: Non-bleed; Snap-acting
  • Working Pressure: 0-1,500 PSIG standard (available to 5,000 PSIG)
  • Specific Gravity: 0.5 minimum
  • Supply Pressure: 30, 60, 100 PSIG standard
  • Output Pressure: 0-30, 0-60, 0-100 PSIG
  • Materials: 316SS wetted and housing components
  • Connections: 2″ NPT standard; available 3″ or larger
Options: Manual override, annulus plug, displacers
Linc 282 Instruction Manual

LINC-282SC Externally Caged Pneumatic Level Switch

These units are used as a level control or as a high or low level alarm.  The pneumatic output can be used to operate valves, sound alarms or perform and other desired pneumatic function.

  • Easy to repair: Repairs on-site in 20 minutes with the “quick-change” pneumatic cartridge
  • Easy to field test: The manual override option enables mechanical and pneumatic function testing while installed
  • Output: Non-bleed; Snap-acting
  • Working Pressure: 0-1,500 PSIG standard (available to 5,000 PSIG)
  • Specific Gravity: 0.5 minimum
  • Supply Pressure: 30, 60, 100 PSIG standard
  • Output Pressure: 0-30, 0-60, 0-100 PSIG
  • Materials: 316SS wetted and housing components
  • Connections: flanged and externally caged

Options: Manual override, annulus plug, displacers

Linc 282 Instruction Manual

L471 Electric Level Switch

Used as a high & low level control, the L471 can activate alarms, provide a switch input for control systems or perform a variety of desired electrical switch operations actuated by a liquid or liquid interface.

  • Easy to repair: Repairs on-site in 20 minutes with the “quick-change” switch cartridge
  • Easy to field test: The manual override option enables mechanical and electric function testing while installed
  • Working Pressure: 0-1,500 PSIG standard (available to 5,000 PSIG)
  • Switch Rating: SPST; 100VA AC; 100W DC; 3 amp in-rush capability, maximum of 250 volts, Hermetically sealed
  • Materials: 316SS wetted and housing components (available in other austenitic metals and plastics)
  • Connections: 1-1/2″ NPT standard; available 2″ or larger
  • Electrical Connection: 1/2″ conduit
  • CSA Certification: Listed as explosion-proof for Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; and Class III, Div. 1
Options include:
  • Manual override & 10 Amp relay assembly
  • Annulus plug & displacers
Linc L471 Instrunction Manual

L471SC Externally Caged Electric Level Switch

Used as a high & low level control, the L471SC can activate alarms, provide a switch input for control systems or perform a variety of desired electrical switch operations actuated by a liquid or liquid interface.

  • Easy to repair: Repairs on-site in 20 minutes with the “quick-change” switch cartridge
  • Easy to field test: The manual override option enables mechanical and electric function testing while installed
  • Working Pressure: 0-1,500 PSIG standard (available to 5,000 PSIG)
  • Switch Rating: SPST; 100VA AC; 100W DC; 3 amp in-rush capability, maximum of 250 volts, Hermetically sealed
  • Materials: 316SS wetted and housing components (available in other austenitic metals and plastics)
  • Connections: 1-1/2″ NPT standard; available 2″ or larger
  • Electrical Connection: 1/2″ conduit
  • CSA Certification: Listed as explosion-proof for Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; and Class III, Div. 1

Options: Manual override, 10 Amp relay assembly, annulus plug, displacers

Linc L471SC Instruction Manual

LV471 Vertical Electric Level Switch

Used as a high & low level control, the LV471 can activate alarms, provide a switch input for control systems or perform a variety of desired electrical switch operations actuated by a liquid or liquid interface.

  • Easy to repair: Repairs on-site in 20 minutes with the “quick-change” switch cartridge
  • Working Pressure: 0-250 PSIG
  • Specific Gravity: 0.7 minimum
  • Switch Rating: SPST; 100VA AC; 100W DC; 3 amp in-rush capability, maximum of 250 volts, Hermetically sealed
  • Materials: 316SS wetted parts
  • Connections: 1-1/2″ NPT standard; available flanged
  • Electrical Connection: 1/2″ conduit
  • CSA Certification: Listed as explosion-proof for Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; and Class III, Div. 1

Option: 10 Amp relay assembly

Linc LV471 Instruction Manual

L 971 Horizontal Extended Body Electric Level Switch

Used as a high & low level control, the L971 can activate alarms, provide a switch input for control systems or perform a variety of desired electrical switch operations actuated by a liquid or liquid interface.

  • Easy to repair: Repairs on-site in 20 minutes with the “quick-change” switch cartridge
  • Working Pressure: 0-2,500 PSIG
  • Specific Gravity: 0.6 minimum
  • Switch Rating: SPST; 100VA AC; 100W DC; 3 amp in-rush capability, maximum of 250 volts, Hermetically sealed
  • Materials: Displacer is polypropylene, all other wetted parts 316SS
  • Connections: 1″ NPT standard; available in 1-1/2″ NPT or flanged
  • Electrical Connection: 1/2″ conduit
  • CSA Certification: Listed as explosion-proof for Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; and Class III, Div. 1
Option available:
  • 10 Amp relay assembly
Linc L971 Instruction Manual

Level Measurement

Kenco Liquid Level Measurement

Manufacturer of a broad range of liquid level indicators, tank gauges, calibration cylinders and pump setting gauges, sight flow indicators and injection quills.

Draw Down Cylinders (Calibration Cylinders)

Draw Down Cylinders are used to calibrate the flow rate of chemical metering pumps and chemical injection systems.
These are ideal to periodically monitor the performance and accuracy of chemical injection and to insert accurate dosages into batch processes. I.C.E. offers expert supply & advice for Kenco level measurement Australia.
Draw Down Cylinder Brochure

5700 Injection Rate Gauges

The 5700 Series Gauge provides a visual means for checking the contents of a bulk tank and a means for checking the injection rate of a chemical metering pump. This is achieved by conducting a one minute test.

5700 Series Brochure

Calibration Pots

Calibration Pots provide the means for determining chemical pump flow rates. The gauge is installed between the suction side of the chemical pump and the tank. The pump rate is checked by closing the valve between the tank and gauge and observing the level change in the gauge for one minute.
​
Design utilizes a tank with shielded tubular gauge for maximum protection from glass breakage.
Calibration Pot Brochure

Drum Gauges

KENCO drum gauges are used to visually monitor the liquid level inventory in horizontal 55 gallon (205 litre) chemical storage tanks. In addition, several models come complete with a test valve to set the injection rate of a chemical metering pump.
The drum gauges are available in a wide range of materials for ultimate corrosion resistance.
Drum Gauges Brochure

Injection Quills

KENCO Chemical Injectors are designed to inject and properly atomize corrosive chemicals into the turbulent stream of a process system pipeline. The KENCO Chemical Injector will minimize the possibility of corrosive chemical build-up on the walls of the pipeline.

 

KENCO Chemical Injectors are recommended for use in pipelines with a flow-rate velocity of 40 feet per second (12.192 meters per second), or less.​

Injection Quill Brochure

Hoffman Controls

DPH-4 Controller

The DPH-4 instrument was built with flexibility in mind. It can be set up as a commercial pool controller measuring PH/ORP, or it can be used as a process controller measuring PH/ORP, PH/PH or ORP/ORP.
Setup and calibrations are entered with easy to use encoders. Programmed parameters are not lost even if power is switched off for extended periods.
​
Precision 4-20mA output with complete isolation between each unit enables the connection to a central monitor or data logging system.
Various timing modes and dosing relay lock-out times protect the installation from excess dosing.
DPH-4 Brochure
DPH-4 Manual

PPH-1 Controller

The PPH-1 is a pH controller designed for single pH input processes. It utilises a sensor to measure the level of pH, when a certain level of pH is reached the controller will trigger dosing cycles. The dosing cycle can operate in three ways.
  • The first operates by cycling on / off timers, this is known as normal.
  • The second operates in a proportional manner, dosing towards the set point at a reduced rate. This avoids over dosing.
  • The third is known as adaptive proportional capacity to ‘learn’ from the behaviour of the system and adjust it’s on and off by an algorithm programmed into the instrument.
It also features an alarm and 4-20 mA output.
PPH-1 Brochure
PPH-1 Manual

PMV-1 ORP Controller

The PMV-1 is an ORP controller designed for cooling tower or process application. It utilises a sensor to measure the level of oxidant in the water, when a certain level of ORP is reached the controller will trigger dosing cycles.
The dosing cycle can operate in three ways.
  1. The first operates by cycling on / off timers, this is known as normal.
  2. The second operates in a proportional manner, dosing towards the set point at a reduced rate. This avoids over dosing.
  3. The third is known as adaptive proportional capacity to ‘learn’ from the behaviour of the system and adjust it’s on and off by an algorithm programmed into the instrument.
It also features an alarm and 4-20 mA output.
PMV-1 Brochure
PMV-1 Manual

DPH-64 Controller

The DPH-64 is ideal for pH or ORP control where fine adjustment or a highly variable process needs to be controlled.
This unit controls either pH or ORP and has facility to correct ‘up’ or ‘down’. A proportional output means that the response of the attached equipment (such as metering pumps) can be paced to accurately maintain the required set point without overshooting.
DPH-64 Brochure
DPH-64 Manual

CTH-2 Cooling Tower Controller

The CTH-2 controller has all of the necessary functions for cooling tower control built into a single easy to use controller. It incorporates conductivity control with inhibitor dosing functionality with many modes of operation. It operates over a 0-5000 uS range with automatic temperature compensation. The conductivity is displayed on a back lit screen that provides easy to understand programming advice and operational descriptions.
It comprises of two independent timers, biocide one functions on a 7 day cycle. The secondary timer operates on a 28 day cycle, essentially allowing the unit to slug dose chemical once each month.
​
The CTH-2 is state of the art – it is the most effective, functional and economical unit available in Australia.
CTH-2 Brochure
CTH-2 Manual

SMH-2 Simulator

This hand held simulator is ideal for commissioning, testing and troubleshooting pH and ORP based systems. The simulator can be connected to the instrument and an output ranged to simulate a process. The control and operation of the system can then be tested.
​
The simulator also can be connected to the sensor to obtain a reading independent of the controller.
For further information on the Hofmann instruments, please contact us.
SMH-2 Brochure
SMH-2 Manual

Etatron Peristaltic Pumps

The Etatron pumps are a budget alternative to low flow and low pressure applications, such as cooling towers and swimming pools.

We stock the following models which are all 230 VAC and have adjustable flow rate:

•    1 litre per hour @ 3 bar
•    4 litres per hour @ 3 Bar
•    12 litres per hour @ 1 Bar

Motors

​I.C.E. stock a range of single and three phase motors to suit our metering pumps.

Tanks & Bunding

I.C.E. stock 125 litre and 275 litre closed head drums.​ Customised tank and bund systems are also available to suit various applications.

Other Instrumentation

I.C.E. source and supply a wide range of components for system integration such as back pressure valves, pulsation dampeners and flow meters.